Xerox DocuColor 2240 Service Manual page 243

9-912 Drum (C) Type Mismatch
Drum Type Mismatch
Initial Actions
Ensure that the correct drum type is installed. Ensure that NVM loc. 751 -168 is set correctly
(80 for XC, XE, DMO).
Procedure
Enter dC330 [009-153] (Drum (C) Data). The display is H.
Y N
Check the wires and connectors. If the check is OK, replace the Cyan Drum Cartridge
(refer to Section 6, Machine Consumables).
Replace the MCU PWB. (PL 13.1).
Figure 1 9-912 Rap Circuit Diagram - Cyan Drum Communication
Status Indicator RAPs
9-912, 9-913
9-913 Drum (K) Type Mismatch
Drum Type Mismatch
Initial Actions
Ensure that the correct drum type is installed. Ensure that NVM loc. 751 -168 is set correctly
(80 for XC, XE, DMO).
Procedure
Enter dC330 [009-154] (Drum (K) Data). The display is H.
Y N
Check the wires and connectors. If the check is OK, replace the Black Drum Cartridge
(refer to Section 6, Machine Consumables).
Replace the MCU PWB. (PL 13.1).
Figure 1 9-913 Rap Circuit Diagram - Black Drum Communication
09/03
2-210
Initial issue
DC 3535/2240/1632, WC M24