83-714 DCN Received after NSC/DTC
DCN received after transmitting NSC/DTC.
Initial Actions
The transmission was terminated by the other party. Contact the other party and check the sta-
tus of the other machine.
Procedure
Switch power off then on. Re-try the Fax job
Bad password, no polled document on remote terminal; jam.
Status Indicator RAPs
83-714, 83-715
83-715 Password-Polling Error
Polling error due to incorrect password.
Initial Actions
Communication could not take place because the ID of the remote machine and the password
specified are not correct.
•
Verify that the password and the phone number are correct.
•
Verify that the remote machine is set up to receive ID from other parties.
NOTE: This fault code could also be displayed when a polling request is rejected.
Procedure
Switch power off then on. Re-try the Fax job
09/03
2-490
Initial issue
DC 3535/2240/1632, WC M24