Rep 9.19 Left Hinge/Right Hinge; Rep 9.20 Right Lift Assembly - Xerox DocuColor 2240 Service Manual

REP 9.19 Left Hinge/Right Hinge

Parts List on PL 5.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Front Cover.
2. Remove Fuser Cover (REP 14.8).
3. Remove Waste Toner Cartridge (REP
4. Remove Waste Toner Cartridge Cover
5. Remove Inner Cover (REP 14.10).
6. Remove Drum Cartridges (REP 9.1).
7. Remove Right Cover (REP 14.3).
8. Remove IBT Belt Assembly (REP 9.15).
9. Remove Lever Assembly (REP 9.18).
10. Remove Left and/or Right Hinges (Figure
a. Remove screws (2) and remove Hinge.
b. Remove screws (2) and remove Hinge.
Screws
(2)
Figure 1 Removing Left and Right Hinges
Replacement
Move Lever to down position before reinstalling IBT Belt Assembly.
Repairs and Adjustments
REP 9.19, REP 9.20
WARNING
9.4).
(REP 9.3).
1).
Screws (2)

REP 9.20 Right Lift Assembly

Parts List on PL 5.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Front Cover.
2. Remove Fuser Cover (REP 14.8).
3. Remove Waste Toner Cartridge
4. Remove Waste Toner Cartridge Cover
5. Remove Inner Cover (REP 14.10).
6. Remove Drum Cartridges (REP
7. Remove Right Cover (REP 14.3).
8. Remove IBT Belt Assembly (REP
9. Remove Lever Assembly (REP
10. Remove Plate (Figure 1).
a. Remove e-rings (2) and washers (2).
b. Remove screws (4) and remove Plate.
c. Remove bearings (2) and washers (2).
Washer
Bearing
Figure 1 Removing Plate
09/03
4-88
WARNING
(REP 9.4).
(REP 9.3).
9.1).
9.15).
9.18).
Washer
Bearing
Washers (2)
E-Rings (2)
DC 3535/2240/1632, WC M24
Plate
Screws (4)
Initial issue