Rep 1.19 One-Touch Panel - Xerox DocuColor 2240 Service Manual

REP 1.19 One-Touch Panel

Parts List on PL 18.2
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Switch the Main Power off.
2. Remove the Control Panel (Figure
2
Flip PWB assy. Dis-
connect connectors
if required for clear-
ance
Figure 1 Removing the Control Panel
3. Remove the One-Touch Panel (Figure
1
Disconnect CN5
from the Control
Panel PWB
2
Remove the wire-
harness
Figure 2 Removing the One-Touch Panel connector
Replacement
1. Install the new One-Touch Panel on the Control Panel
Repairs and Adjustments
REP 1.19
WARNING
1).
1
Remove screws (5)
2).
3
Remove the One-
Touch Panel (3
snap-hooks)
(Figure 3).
2
install the One-
Touch Panel (3
snap-hooks)
Figure 3 Installing the One-Touch Panel
2. Connect the One-Touch Panel wireharness to the Control Panel PWB
1
Connect CN5 to
the Control Panel
PWB
2
Route wireharness
as shown
Figure 4 Connecting the One-Touch Panel
3. Reinstall the Control Panel.
09/03
4-18
1
Route cable
through hole in
the Control Panel
(Figure 4).
Initial issue
DC 3535/2240/1632, WC M24