Xerox DocuColor 2240 Service Manual page 49

1-303 RAP
The Tray Module Left Door is open.
Procedure
Enter dC330 [001-304] and press the Start button. Actuate the Tray Module LH Cover Interlock
Switch (PL 16.13) with a screwdriver. The Display changes state.
Y N
+24 VDC is measured between the Tray Module PWB P/J554-3 (+) and GND (-).
Y N
Refer to Figure 1 and check the wires from the Tray Module PWB P/J554-3 to Tray
Module Cover Interlock Switch FS813 for damage. If the wires are good, replace the
Tray Module Cover Interlock Switch
Replace the Tray Module PWB (PL
Check the Switch Actuator and the Cover installation
Figure 1 1-303 RAP Circuit Diagram - Tray Module LH Cover Interlock Switch
Status Indicator RAPs
1-303
(PL 16.13).
16.15).
(PL 16.13).
09/03
2-16
Initial issue
DC 3535/2240/1632, WC M24