Rep 14.2 Rear Cover (Iot); Rep 14.3 Right Cover - Xerox DocuColor 2240 Service Manual

REP 14.2 Rear Cover (IOT)

Parts List on PL 10.3
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Remove Rear Cover (Figure 1).
a. Open Harness Cover and disconnect Harnesses
b. Remove Screws (4).
c. Remove Rear Cover.
Figure 1 Removing Rear Cover (IOT)
Repairs and Adjustments
REP 14.2, REP 14.3
WARNING
Rear
Cover
Screws (4)
Harness Cover
Harnesses

REP 14.3 Right Cover

Parts List on PL 10.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Front Cover.
2. Without Finisher, go to step 4.
With Finisher, Remove Finisher
12.19).
3. Remove the Front and Rear Brackets
Figure 1 Front and Rear Brackets
4. Remove Right Cover (Figure
a. Open Right Door.
b. Remove Screws (3).
c. Push cover down, or allow cover to drop slightly to release Hidden Tabs, then pull
cover away and remove it.
09/03
4-144
WARNING
(REP 12.4) and remove Finisher Rack Assembly
(Figure 1).
2).
DC 3535/2240/1632, WC M24
(REP
Initial issue