Xerox DocuColor 2240 Service Manual page 882

12. Remove ATC Sensor (Figure 2).
1
Lift Lock
and move
end away
from Tab
Figure 2 Removing ATC Sensor
Initial issue
DC 3535/2240/1632, WC M24
Replacement
1. Remove ATC Sensor Setup Data Tag from new sensor. On tag, highlight K, C, M, or Y as
required for color of developer housing. Raise Xerographic Release Lever and install Tag
in position shown
2
Remove Seal
from under
Sensor
2. Perform ATC Sensor Setup
09/03
4-99
(Figure 3).
Tag with K
highlighted
Tag with C
Tag with M
highlighted
highlighted
2
Position Tag in correct location
Figure 3 Installing ATC Sensor Setup Data Tag
(ADJ 9.2).
1
Tag with Y
Raise Xerographic
highlighted
Release Lever
Repairs and Adjustments
REP 9.26