Xerox DocuColor 2240 Service Manual page 196

8-175 Registration Sensor On Jam Tray 5
The Registration Sensor does not detect paper fed from the MSI.
Initial Actions
• Check condition and specification of the paper supply.
• Check for obstructions in the paper feed path.
• Clean the MSI Feed Roll and check for wear.
• Clean the Takeaway Roll and check for wear.
• Check the drive transmissions for damage or wear.
• Push down on the Bottom Plate (PL
Bottom Plate to its upper position. Check for weak or damaged spring/s.
Procedure
Open the Left Cover Assembly (PL 2.9). Enter
unblock the Registration Sensor (PL 2.6). The display changes state.
Y N
Press Stop. Check the circuit of the Registration Sensor
RAP for troubleshooting procedure.
The machine is a DC3535.
Y N
Close the Left Cover Assembly and press Stop. Enter
The Tray 5 Feed Solenoid (PL 2.14) energizes.
Y N
Press Stop. Check the circuit of the Tray 5 Feed Solenoid
OF 99-4 RAP for troubleshooting procedure.
Press Stop.
• Ensure that the connectors shown in the circuit diagrams
securely connected and that the wires are not damaged.
• Replace the Registration Sensor
• If the problem persist, replace the ESS PWB
Close the Left Cover Assembly and press Stop. Enter
Tray 5 Feed Solenoid (PL 2.14) energizes.
Y N
Press Stop. Check the circuit of the Tray 5 Feed Solenoid
4 RAP for troubleshooting procedure.
Press Stop.
• Ensure that the connectors shown in the circuit diagrams
connected and that the wires are not damaged.
• Replace the Registration Sensor (PL
• If the problem persists, replace the ESS PWB
Initial issue
DC 3535/2240/1632, WC M24
2.14) and release it, check that the springs return the
dC330 [008-104] and press Start. Block and
(Figure 1). Refer to the
dC330 [007-003] and press Start.
(Figure 2). Refer to the
(Figure 1, Figure
(PL 2.6).
(PL 13.1).
dC330 [007-003] and press Start. The
(Figure 3). Refer to the
(Figure 1, Figure 3) are securely
2.6).
(PL 13.1).
Figure 1 8-175 RAP Circuit Diagram - Registration Sensor
OF 99-1
Figure 2 8-175 RAP Circuit Diagram - DC2240/1632 Tray 5 Feed Solenoid
2) are
OF 99- Figure 3 8-175 RAP Circuit Diagram - DC3535 Tray 5 Feed Solenoid
09/03
2-163
Status Indicator RAPs
8-175