102-368 Short of UI Memory
Insufficient memory, or connection failure
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
If the problem continues, replace the Control Panel
Initial issue
DC 3535/2240/1632, WC M24
(PL
18.2)
102-369 Invalid Interface Value
Invalid interface value. Panel-SW failure
Procedure
Switch power off then on. The problem continues.
Y
N
Return to service call procedures.
Perform re-installation of the software.
09/03
2-615
Status Indicator RAPs
102-368, 102-369