Rep 6.13 Exposure Lamp - Xerox DocuColor 2240 Service Manual

REP 6.13 Exposure Lamp

Parts List on PL 18.6
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
Avoid touching exposure lamp with your bare hands during removal or installation. Oil from
your hands will contaminate surface of lamp.
1. Open DADF (REP 5.1).
2. Remove Platen Glass (REP 6.2).
3. Position the Full Rate Carriage adjacent to the notch in the IIT frame.
4. Remove Exposure Lamp (Figure 1).
2
Remove
Screw (1)
1
Disconnect
Connector
Figure 1 Removing Exposure Lamp
Repairs and Adjustments
REP 6.13
WARNING
CAUTION
3
Remove
Exposure
Lamp
Notch
09/03
4-52
Initial issue
DC 3535/2240/1632, WC M24