Xerox DocuColor 2240 Service Manual page 427

17-965 Stacker Tray Full
The Network Controller reports that the Stacker Tray in the Finisher is full.
Procedure
Empty the Stacker Tray. If the problem continues, go to the
Status Indicator RAPs
17-965, 17-966
12-960 RAP.
09/03
2-394
17-966 Mix Full Stack
The Network Control reports one of the following conditions:
• Compared to the maximum paper size that was loaded at the previous job, the paper size
(either feed direction or width direction) of the next job is bigger.
• Staple mode has been changed while the width of the maximum paper size that was
loaded at the previous job is less than 279.4mm.
• The maximum paper size that was loaded at the previous job is unknown.
Procedure
Empty the Stacker Tray. If the problem continues, go to the 12-961 RAP.
Initial issue
DC 3535/2240/1632, WC M24