Xerox DocuColor 2240 Service Manual page 75

3-370 Marker Code Detect Failure
The end code cannot be found in the compressed data.
Procedure
Switch the power off then on. The problem continues.
Y N
Return to Service Call Procedures.
Replace the RAM (PL 13.1).
Perform ADJ 9.8. If the problem continues, replace the HDD
If the problem persists, replace the ESS PWB
Status Indicator RAPs
3-370, 3-747
(PL 13.1).
(PL 13.1).
3-747 Print Instruction Failure
The print parameter is incorrect. This may indicate that a selected function such as finishing,
stapling, or duplexing is not available.
Procedure
Switch the power off then on. The problem continues.
Y N
Return to Service Call Procedures.
Change the print parameter and print again.
09/03
2-42
Initial issue
DC 3535/2240/1632, WC M24