Rep 10.1 Fuser; Rep 10.2 Fuser Fan - Xerox DocuColor 2240 Service Manual

REP 10.1 Fuser

Parts List on PL 7.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
Personal injury may result from grasping hot areas of Fuser Module. If a hot Fuser Mod-
ule must be removed, grasp Fuser Module by Grip Rings
Damage to work surface may result if a hot Fuser Module is removed and positioned on an
unprotected work surface. Place a hot fuser on ten sheets of paper.
1. Open Left Cover Assembly.
2. Remove Fuser Module (Figure 1).
2
Use Grip Rings to
remove Fuser
1
Loosen
Screws
Figure 1 Removing Fuser Module
Initial issue
DC 3535/2240/1632, WC M24
WARNING
WARNING
(Figure 1).
CAUTION

REP 10.2 Fuser Fan

Parts List on PL 8.1
Removal
To avoid personal injury or shock, do not perform repair or adjustment activities with
the power switch on or electrical power applied to the machine.
1. Open Front Cover.
2. Remove Right Cover (REP 14.3).
3. Remove Top Cover (REP 14.1).
4. Remove Rear Cover (REP 14.2).
5. Remove Fuser Fan (Figure 1).
1
Disconnect
connector
Figure 1 Removing Fuser Fan
09/03
4-101
WARNING
2
Remove screws
Repairs and Adjustments
REP 10.1, REP 10.2