Xerox DocuColor 2240 Service Manual page 917

5. Remove the Finisher PWB (Figure
Figure 3 Removing Finisher PWB
Replacement
Install the retained ROM removed in step
PWB.
Before attempting to install the PWB Cover, make sure the ceramic Cores, installed to the
wires, are dressed properly inside the PWB Box.
Repairs and Adjustments
REP 12.16
3).
Remove
Screws (6)
and PWB
3 of the removal procedure on the new Finisher
09/03
4-134
Initial issue
DC 3535/2240/1632, WC M24