Lvps Assembly; Fan - Star Micronics LS-5 SERIES Technical Manual

REPLACEMENT AND ADJUSTMENTS OF PARTS

5-11. LVPS Assembly

(1) Remove the following units:
• Earth plate assembly (according to the procedure
described in section 5-8)
• Ten connectors (P/J11 to P/J19) of the MCU PCB [1]
• Two screws [2]
• Screw [3]
• MCU PCB [1] and electrical box base [4]
• Screw [5]
• Screw [6]
• Two screws [7]
• Two screws [8]
• LVPS assembly [9]
• Saddle edge H [10]
Caution when assembling:
Make sure the harness doesn't interfere with the movement
of the link assembly.

5-12. Fan

(1) Remove the following units:
• Electrical box cover (according to the procedure
described in section 5-7)
• Connector (P/J18) [1]
• Two screws [2]
• Fan [3]
Caution when assembling:
Attach the fan so it faces the direction in which air will be
discharged from the interior of the equipment.
– 50 –