Parameter Setting In "Quick Motor Data Setting" Mode; Button/Keys Inactive In This Mode; Operation Mode ② - Connection Macro Selection - Siemens SINAMICS V10 Operating Instructions Manual

Parameter setting in "Quick motor data setting" mode

Example: P0304
Figure 6-19
Note
The value set by pressing OK will be displayed by default next time.
The digit bit can be dynamically changed according to the parameter value.

Button/keys inactive in this mode

The STOP, RUN and LOC/REM keys are inactive in this mode.
6.6.2 Operation mode ② - Connection macro selection
Connection macro selection
Figure 6-20 Connection macro selection
SINAMICS V10
Operating Instructions, 08/2011, A5E03453178 (this is not an order number)
Press OK
OK
Press
Parameter setting example (P0304)
Turn
OK
. . .
(Default)
OK
OK
SET
Turn
Turn
OK
6.6 Overview of various operation modes
Press OK
OK
. . .
OK
Turn
OK
Commissioning
67