Dss Console; Dss Buttons; Calling A Station; Transferring To An Idle Station - Toshiba DP5000-Series User Manual

DSS Console

The 60 button Direction Station Selection (DSS) Console operates operates along-
side a digital telephone to provide 60 (up to 180) additional buttons (shown right).
The 60 programmable feature buttons can be assigned as CO line, extension, DSS,
One Touch Speed Dial or any other flexible feature.
The DDM5060 console uses dual red and green LEDs to show call and feature sta-
tus.

DSS Buttons

DSS buttons can appear on both the ADM and DSS Console. Each DSS button is
associated with a particular station in your telephone system. DSS buttons can trans-
fer an outside call to the associated station or make a direct call to the associated
station.
The DSS LED lights steady red when the station associated with the DSS button is
ringing, busy on a call, or is idle, but all appearances of the station's extensions are
busy or in-use by other stations. When the associated DSS button is in the Do Not
Disturb mode, the LED blinks red at a slow rate.
DSS buttons cannot directly call station Phantom extension numbers, Distributed
Hunt Group Directory Numbers, or ACD Groups. DSS buttons may be configured as
One Touch Buttons that may be programmed to call these destinations.

Calling a Station

‰ To call a station's extension from either a DSS console or a ADM, press the DSS
associated with the station.
A station call with a DSS button can be made on-hook or off-hook, and with
Voice First or Tone signaling. After pressing the button, treat the call like any
other station call made from a digital telephone.

Transferring to an Idle Station

You can transfer internal or outside calls to an idle station from either a DSS console
or a ADM.
Strata CIX DP5000-series Telephone UG 01/08