Installation Of The Upgrade Memory Kit; The Upgrade Memory Kit - Avaya G430 Deploying And Upgrading

------------------
Type
Description
Serial Number
HW Vintage
HW Suffix
Faults
When no VoIP module is installed in the optional VoIP module slot, the output for the slot
includes:
MEDIA SOCKET #2
------------------
Type
Description
Serial Number
HW Vintage
HW Suffix
Faults

Installation of the upgrade memory kit

By using the upgrade memory kit, you can increase the number of announcement files on the
G430 from 256 to 1024 by storing the files on a removable compact flash. You can also increase
the total announcement time from 45 minutes to 4 hours. However, because the announcements
are played from RAM, you must also increase RAM to 512 MB.
Note:
The G430 hardware vintage 3 does not require a new memory card. For more information
about checking the hardware vintage, see
The upgrade memory kit contains:
• One 1 GB compact flash memory card
• One memory card with 512 MB of RAM: Only for G430 v1 and G430 v2

The upgrade memory kit

The G430 has a single RAM slot housing a 256 MB RAM card. If you wish to support an increased
number of announcement files, you must upgrade the G430 memory by replacing the 256 MB
RAM card with a 512 MB RAM card.
The RAM slot is located on the G430 main board. You must remove the G430 cover to replace a
RAM card. This procedure includes the following steps:
1. Removing The G430 cover
2. Replacing The RAM card
3. Replacing The G430 cover
July 2018
: MP80 VoIP DSP Module
: VoIP DSP resource with 80 channels
: 07IS15812717
: 0
: B
: No Fault Messages
: UNKNOWN
: UNKNOWN
: UNKNOWN
: UNKNOWN
: UNKNOWN
: NOT PRESENT
Checking the G430 hardware vintage
on page 67.
on page 74.
on page 72.
Deploying and Upgrading Avaya G430 Branch Gateway
Comments on this document? infodev@avaya.com
Field Replaceable Unit upgrades and replacements
on page 85.
73