Before using the machine
1.4
Loading paper
1.4.1
Loading paper into the tray 1 (bypass tray)
Paper can be fed manually through the tray 1 if you wish to print onto paper that is not loaded into a paper
tray, or if you wish to print onto thick paper 4, postcards, envelopes, OHP transparencies or label sheets.
Reminder
If custom size paper is loaded into a paper tray, specify the paper size.
!
Detail
For thick paper 4, only A3 w, A4 v, 11 ×17 w and Letter v are available for printing.
1
Open the tray 1.
–
When loading large-sized paper, pull out the tray
extension.
2
With the side to be printed on facing down, insert the paper as much as possible into the feed slot.
3
Slide the lateral guides to fit the size of paper being
loaded.
How is curled paper loaded?
?
% Flatten the paper before loading it.
How many sheets of paper and other media can be
?
loaded?
% Do not load so many sheets of plain paper that the top
of the stack is higher than the , mark.
Note
If necessary, specify the paper size and paper type.
For details, refer to "Paper Settings Menu" on page 8-17.
8650
Tray
extension
Lateral
guides
1
1-22