Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings; Using The Standard Bin And Paper Stop - Konica Minolta bizhub 4000P User Manual

Loading paper and specialty media

The selection and handling of paper and specialty media can affect how reliably documents print. For
more information, see Avoiding jams

Setting the paper size and type

1. From the printer control panel, navigate to:
>Settings >
2. Press the up or down arrow button to select the tray or feeder, and then press
3. Press the up or down arrow button to select the paper size, and then press
4. Press the up or down arrow button to select the paper type, and then press
settings.

Configuring Universal paper settings

The Universal paper size is a user-defined setting that lets you print on paper sizes that are not preset in
the printer menus.
Notes:
• The smallest Universal paper size is 76.2 x 127 mm (3 x 5 inches), and is supported only from the
multipurpose feeder.
• The largest Universal paper size is 215.9 x 355.6 mm (8.5 x 14 inches), and is supported from all
paper sources.
1. From the printer control panel, navigate to:
>Settings >
select a unit of measure >
2. Select Portrait Width or Portrait Height, and then press
3. Press the left or right arrow button to change the setting, and then press

Using the standard bin and paper stop

The standard bin holds up to 150 (for bizhub 4000P) or 250 (for bizhub 4700P) sheets of 20-lb paper. It
collects prints facedown. The standard bin includes a paper stop that keeps paper from sliding out the
front of the bin as it stacks.
User's Guide
and Storing paper.
>Paper Menu > >Paper Size/Type >
>Paper Menu > >Universal Setup >
.
- 36 -
.
.
to change the
>Units of Measure >
.
>