4-Loading Paper And Specialty Media; Setting The Paper Size And Type; Configuring Universal Paper Settings - Konica Minolta bizhub 3300P User Manual

4—Loading paper and specialty media
The selection and handling of paper and specialty media can affect how reliably documents print. For
more information, see Avoiding jams

Setting the paper size and type

Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
Notes:
- Print a network setup page or menu settings page, and then locate the IP address in the TCP/IP
section. The IP address appears as four sets of numbers separated by periods, such as
123.123.123.123.
- If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2. Click Settings >Paper Menu.
Using the printer settings on the computer
Depending on your operating system, access the Paper menu using the Local Printer Settings Utility or
Printer Settings.
Note: The paper size and type settings will be saved until you reset factory default settings.

Configuring Universal paper settings

The Universal paper size is a user-defined setting that lets you print on paper sizes that are not preset in
the printer menus.
Notes:
• The largest supported Universal size is 215.9 x 355.6 mm (8.5 x 14 inches).
• The smallest Universal size supported in the multipurpose feeder is 76.2 x 127 mm (3 x 5 inches).
Using the Embedded Web Server
1. Open a Web browser, and then type the printer IP address in the address field.
2. Click Settings >Paper Menu >Universal Setup.
3. Select the unit of measure, or click Print Width or Print Length.
4. Change the setting, and then click Submit.
User's Guide
and Storing paper.
- 36 -