Unit Change; Software Switch Setting; Lct Paper Size Setting - Konica Minolta bizhub C250P Service Manual

Field Service Ver. 2.0 Mar. 2006
17.10.4

Unit Change

Functions • To select who is to replace a unit.
• When the unit life arrives, the warning display is intended for the specific person who
is going to replace the unit.
When "User" is selected
When "Service" is selected : Life warning.
Use • Upon setup
Setting/ • The following are the default settings:
Procedure
Toner Cartridge
Imaging Unit
Waste Toner Box
Punch Dust Box
17.10.5

Software Switch Setting

Functions
Use
• Not Used
Setting/
Procedure
17.10.6

LCT Paper Size Setting

Functions • To set the paper size for the LCT
Use • Use to change the paper size for the LCT.
Setting/ The default setting depends on the setting made for the applicable marketing area.
Procedure
: Printing is inhibited.
US, Japan, Others 4
: "User" Service
: User "Service"
: User "Service"
: User "Service"
A4
Europe, Others1/2/3
"User" Service
"User" Service
"User" Service
"User" Service
8 1/2 x 11
17. Jig Soft
251