Quantum scalar i40 User Manual page 82

Chapter 4: Configuring the Library
Working With Partitions
56
page 148). If you do this, be sure to only remove cartridges assigned to
that partition (see Viewing the Library Configuration Report
page 220).
After a partition is deleted, its resources (for example, tape drives and
slots) become available and can be reassigned to new or existing
partitions.
Deleting a partition does not delete users assigned to that partition.
However, if these users are not assigned to other partitions, they will not
be able to perform any library operations. For information on how to
assign a user to another partition, see
page 57.
Note: You may need to modify settings in your host application as a
result of deleting a partition. See your host application
documentation.
You can delete partitions on both the operator panel and the Web
client.
Operator Panel
1 Select Setup > Configure Partitions > Delete Partition.
2 If more than one partition is configured on the library, use the Up
and Down buttons to select a partition from the list.
3 Press Delete.
4 Save the library configuration (see
on page 106).
Web Client
1 Select Setup > Partitions.
2 Select a partition and click Delete.
3 Save the library configuration (see
on page 106).
Changing Access to Partitions
Saving the Library Configuration
Saving the Library Configuration
Quantum Scalar i40 and Scalar i80 User's Guide
on
on