Viewing, Saving, And E-Mailing Library Logs - Quantum scalar i40 User Manual

Chapter 8: Getting Information About the Library

Viewing, Saving, and E-mailing Library Logs

Viewing, Saving, and E-mailing Library Logs
226
• Encryption — The encryption state of the media in the slot. In order
for the library to know the encryption state, the tape must have
been placed into an encryption-capable tape drive in the library. The
encryption-capable tape drive reads and records the encryption
state of the tape, and the encryption state displays as "Encrypted"
or "Not Encrypted." If the tape was not placed into an encryption-
capable tape drive in the library, or if the slot is empty, the
encryption state displays as "Unknown."
• Get Count — The number of times the picker successfully removed
a tape from the slot.
• Get Retries — The number of times the picker had to perform a
recovery operation to remove a tape from the slot.
• Put Count — The number of times the picker successfully placed a
tape into the slot.
• Put Retries — The number of times the picker had to perform a
recovery operation to place a tape into the slot.
Web Client
Select Reports > All Slots.
You can view, save, and e-mail several logs containing information
about the library:
• Cleaning Log
• Diagnostic Tickets Log
• Media Security Log (available only with Advanced Reporting license)
• Media Usage Log (available only with Advanced Reporting license)
• SKM Encryption Key Import Warning Log (with EKM License)
• Tape Drive Log
Quantum Scalar i40 and Scalar i80 User's Guide