Working With Local User Accounts and Passwords
Using the Web Client
Default Administrator
Account
Quantum Scalar i40 and Scalar i80 User's Guide
3 Press OK.
4 Save the library configuration (see
on page 106).
Administrators can create and modify two types of local user accounts:
user and administrator. These users have different library privilege levels
and can access different things. The Web client requires user accounts
and user logins; the operator panel does not. You can configure the
operator panel to run with logins required. You can also configure the
library to use Lightweight Directory Access Protocol (LDAP) accounts.
This section covers:
•
Using the Web Client Default Administrator Account
•
Privilege Levels
on page 80
•
Creating Local User Accounts on the Web Client
•
Modifying Local User Accounts on the Web Client
•
Deleting Local User Accounts on the Web Client
•
Enabling and Creating Passwords on the Operator Panel
•
Disabling Passwords on the Operator Panel
•
Resetting Passwords on the Operator Panel
You must have administrator privileges to create, modify, and delete
local user accounts.
The library ships with a default administrator account for use on the
Web client. The default administrator account has the following
settings:
• User name:
admin
• Password:
password
Chapter 4: Configuring the Library
Working With Local User Accounts and Passwords
Saving the Library Configuration
.
on page 79
on page 81
on page 82
on page 83
on page 83
on page 86
on page 87
79