Quantum scalar i40 User Manual page 147

Quantum Scalar i40 and Scalar i80 User's Guide
The Media Integrity Analysis report collects the following information
for each TapeAlert:
• Date/Time
• Tape drive physical serial number
• Cartridge barcode
• TapeAlert value
• TapeAlert Description
You can only access this report from the Web client.
Web Client
1 From the library menu bar, select
Media Integrity Analysis
The Media Integrity Analysis Report configuration page opens. This
may take several minutes.
2 Configure the report by specifying the following:
• Date Range — Specifies the range of time covered by the report.
Choose Last 7 days; Last 4 weeks (default); Last 3 months; or All
History (as far back as there is data in the log file).
• Attributes—Specifies which values are included in the report,
and how they are combined. Select in any combination,
including all (default) and none. If you select no attributes, the
chart displays the TapeAlert count for the selected Grouping.
• Cartridge Barcode — All relevant tape cartridges.
• Drive Physical SN — All relevant tape drives.
• TapeAlert — The TapeAlert flags that were issued. For a
description of all TapeAlert flags, see
Flag Descriptions.
• Chart — How the data is displayed in the chart. Choose Area,
Bar (default), Line, or Pie.
Chapter 5: Advanced Reporting
Using Advanced Reporting Reports
Reports > Advanced Reporting >
.
Appendix B, Tape Alert
121