Encryption Key Management - Quantum scalar i40 User Manual

Chapter 1: Description
Licensable Features
Encryption Key
Management
14
Control Path Failover (CPF) - Provides support for configuring the
LTO-5 or LTO-6 drive for control path failover. When control path failover
is used, one drive is assigned as the primary control path and another
drive as the control path failover (secondary) drive. The control path
failover drive is used whenever the primary control path drive fails or is
inoperable.
Note: CPF can be performed only with HP LTO-5 and HP LTO-6 drives.
Reports - Listed below are report names. You can view, configure, send
via e-mail, and save and reuse report configurations as templates. In
addition, you can automatically e-mail any of the reports to designated
recipients at specified, scheduled times.
•
Drive Resource Utilization Report
information, showing you which tape drives are working at
optimum capacity and which are under-utilized. This can help you
allocate your tape drive resources properly.
•
Media Integrity Analysis Report
various combinations of tape drives, tape cartridges, and Tape Alert
flags. This can help you determine if a problem is due to a specific
tape drive or tape cartridge.
Logs - Listed below are available logs:
•
Media Security Log -
library.
•
Media Usage Log
in the library.
For information on how to use the advanced reporting features, see
Advanced Reporting
The Encryption Key Management (EKM) license enables tape drive
transparent encryption using library-managed encryption. The EKM
license applies to the entire library, regardless of how many slots are
licensed. If you increase the number of slots in your library, your existing
license applies to your new library configuration. For more information
about EKM, see Chapter 7, Encryption Key
—Provides tape drive usage
—Provides Tape Alert count for
Lists media that has been removed from the
- Lists information on all media that have ever been
on page 111.
Quantum Scalar i40 and Scalar i80
Management.