Modifying Local User Accounts On The Web Client - Quantum scalar i40 User Manual

Chapter 4: Configuring the Library
Working With Local User Accounts and Passwords
Modifying Local User
Accounts on the Web
Client
82
6 Select Privilege - Select a local user account privilege level by
selecting either Admin or User. For more information on users and
administrators, see
7 If the new local user account was given
The Create User Account - User Name screen displays, where User
Name is the name of the user account. This screen lists all library
partitions.
8 Select the library partitions that you want the user to access.
9 Click Apply.
10 Save the library configuration (see
on page 106).
After a local user account has been created, administrators can modify
the account settings, such as the password, privilege level, and partition
access. You cannot modify the user name. Instead, you will need to
delete the user account and create a new one (see
Accounts on the Web Client
Web Client
1 Select Setup > User Management > User Accounts.
The Setup - Users screen displays.
2 Select a user account and click Modify.
The Modify User Account screen displays, where User Name is the
name of the local user account.
3 Enter your Admin password to verify you have privileges to modify
the account.
4 Enter new password for selected user name - Optionally, type a
new password. Passwords are limited to 6–16 lower-case
alphanumeric characters and can include also include underscores
(_), periods (.), hyphens (-), asterisks (*), and the "at" symbol (@).
For example:
pass_19
5 Confirm new password for selected user name - Retype the
password.
6 Select Privilege - Optionally, change privilege level.
Privilege Levels on page 80.
Saving the Library Configuration
on page 83).
.
Quantum Scalar i40 and Scalar i80 User's Guide
user
privileges, click Next.
Deleting Local User