Enabling Automatic Ekm Path Diagnostics; Figure 33 Enabling Automatic Ekm Path Diagnostics - Quantum scalar i40 User Manual

Chapter 7: Encryption Key Management
EKM Path Diagnostics
Enabling Automatic
EKM Path Diagnostics
Figure 33 Enabling Automatic
EKM Path Diagnostics
188
You can enable the library to automatically perform EKM Path
Diagnostics at selected intervals. During each interval, the library tests
every configured key server. The default test interval is 10 minutes. The
library generates a diagnostic ticket if there are problems.
Automatic EKM Path Diagnostics is enabled by default and should
always be left enabled. You should not need to disable it unless
Quantum Support directs you to do so.
For a list of tests performed, see
To enable Automatic EKM Path Diagnostics:
1 From the Web client, select Setup > Encryption > System
Configuration (see
2 Select the Automatic EKM Path Diagnostics check box.
3 Select a test interval from the Interval drop-down list.
EKM Path Diagnostics
Figure 33).
Quantum Scalar i40 and Scalar i80 User's Guide
on page 186.