Quantum scalar i40 User Manual page 193

Quantum Scalar i40 and Scalar i80 User's Guide
3 Close the I/E station.
4 If manual cartridge assignment is enabled, the I/E Assign screen
displays on the operator panel. If manual cartridge assignment is
enabled, select the System partition.
5 Press Apply.
6 Continue using one of these options:
• Importing Cleaning Cartridges via the Operator Panel
page 167
• Importing Cleaning Cartridges via the Web Client
Importing Cleaning Cartridges via the Operator Panel
1 Select Actions > I/E > Import Cleaning Tape.
A list of all the cleaning cartridges present in the I/E station displays.
2 If more than one cleaning cartridge is present in the I/E station, use
the Up and Down buttons to select a cleaning cartridge to import,
or select ALL to import all cleaning cartridges. The ALL option is
only available if there are enough empty cleaning slots in the library
to accommodate all the cleaning cartridges.
3 Press Import.
The library moves the cleaning cartridge to a previously configured
cleaning slot.
Importing Cleaning Cartridges via the Web Client
1 Select Operations > Cleaning Media > Import.
The Operations - Import Cleaning Media screen displays. This
screen contains a list of the cleaning cartridges in the I/E station. If
no cleaning slots are configured, a message displays stating that the
library cannot import cleaning cartridges.
2 Note the number of empty cleaning slots that appear in the Total
Empty Cleaning Slots field on the right side of the screen. The
number of cleaning cartridges you can import is limited to the
number of empty cleaning slots.
Chapter 6: Performing Library Operations
Cleaning Tape Drives
on
on page 167
167