Figure 4 Scalar I40 Back Panel Components - Quantum scalar i40 User Manual

Chapter 1: Description
Library Components
Figure 4 Scalar i40 Back Panel
Components
10
Installed Tape Drive Location Coordinates
Installed tape drives have a two-digit location coordinate. These are the
coordinates shown in the library configuration report. The first digit is
always zero. The second digit indicates the location of the tape drive
relative to the other tape drives. The bottommost tape drive has
location coordinates [0,1], the next-to-bottom has location coordinates
[0,2], and so on.
Half-height FC and SAS tape drives Half-height FC and SAS tape drives
Tape drive FC cables
Tape drive SAS cables
cable in LEFT
Quantum Scalar i40 and Scalar i80
Power supply cord
Ethernet
Service port –
do not use
SCB port