Cleaning Log; Diagnostic Tickets Log - Quantum scalar i40 User Manual

Cleaning Log

Diagnostic Tickets Log

Quantum Scalar i40 and Scalar i80 User's Guide
The Cleaning Log shows all cleanings that have been performed in the
library. When the log reaches its maximum size, the oldest information
is replaced as new information is added.
The log provides the following information: Date Time (date and time);
Barcode (barcode of the cleaning cartridge); Drive (location coordinates
of the tape drive that was cleaned); mediaSN (Media cartridge serial
number); mediaMfg (Media cartridge manufacturer); mediaMfgDate
(Media cartridge manufacturing date - format: YYYYMMDD); Status
(pass/fail); Cleaning Type (Manual, Auto, MoveMedium); Expired
("Invalid"if the tape is expired or a data tape was improperly used to
clean; "-" if not applicable); and Usage Count ("N/A" if the cleaning did
not complete).
Web Client
1 Select Reports > Log Viewer.
2 Select Cleaning Log and press Next.
The report displays in a new window for viewing.
3 You can save or e-mail the report following the on-screen
instructions.
Note: If you want to e-mail the log file to a recipient, type the
recipient's name in the text box next to the E-mail button,
and then click the E-mail button. You must have your e-
mail notification configured in order to e-mail a log file.
See Configuring the Library E-Mail Account
more information.
The Diagnostic Tickets Log records all diagnostic tickets issued by the
library.
The log provides the following information: Num (ticket number to
provide a consecutive listing of tickets in the order issued; the first ticket
issued is assigned number 1, the second ticket 2, and so on); State
(open, unopened, closed); Priority (low, high, urgent); Created (date the
ticket was first issued); Last Updated (date the ticket was last issued);
Cause Code (the number assigned to the fault and which displays in the
Chapter 8: Getting Information About the Library
Viewing, Saving, and E-mailing Library Logs
on page 75 for
227