Chapter 4: Configuring the Library
Configuring Security Settings
Configuring Security Settings
Network Interface
102
You can enable/disable the following security settings on the operator
panel:
•
Network Interface
•
SSH Services
•
Internet Control Message Protocol (ICMP)
•
Remote Access Via Web Client
•
Remote Service Login
•
SNMP V1/V2
•
SSL
Enables or disables all external access to the library. This setting is
enabled by default to allow external access.
Operator Panel
1 Select Setup > Security Services > Network IF.
2 Press Modify.
3 Use the Up and Down buttons to select Enabled or Disabled and
press Apply.
4 Make another selection or press Exit.
5 Save the library configuration (see
on page 106).
Saving the Library Configuration
Quantum Scalar i40 and Scalar i80 User's Guide
Need help?
Do you have a question about the scalar i40 and is the answer not in the manual?