Web Client Home Page - Quantum scalar i40 User Manual

Menu Trees
Quantum Scalar i40 and Scalar i80 User's Guide
The following menus organize operations and commands into logical
groupings:
• The Setup menu consists of commands that users with
administrator privileges can use to set up and configure various
aspects of the library, including partitions, I/E station slots, cleaning
slots, control paths, network settings, drive settings, users,
notifications, date and time, licenses, library registration, and e-
mail.
• The Operations/Actions menu consists of commands that enable
users to change the library's mode of operations, import and export
cartridges, load and unload tape drives, move media, lock or unlock
the I/E station, log out, and shut the library down. The menu is
called Actions on the operator panel and Operations on the Web
client.
• The Tools menu consists of commands that you can use to maintain
your library such as viewing diagnostic tickets, generating
diagnostic logs, identifying drives, configuring the internal network,
saving and restoring the library configuration, setting system and
security settings, and updating firmware, and performing library
diagnostics.
• The Reports menu provides various kinds of library information.
Administrators have access to all menu commands, but users' privileges
are more limited.
Figure 12 lists the operator panel menus.
menus.
Chapter 3: Understanding the User Interface
Figure 13 lists the Web client
Menu Trees
33