Quantum scalar i40 User Manual page 120

Chapter 4: Configuring the Library
Working With LDAP User Accounts (Remote Authentication)
94
3 Under Authentication Type, do one of the following:
• To enable Kerberos, select LDAP with Kerberos and continue
with Step 4.
• To disable Kerberos, select LDAP or Local Only and continue
with Step 6.
• To modify Kerberos configuration settings, continue with
Step 4.
4 Fill the following Kerberos fields:
• — The Kerberos realm name, typed in all uppercase
Realm
letters. Usually the realm name is the DNS domain name.
Example: MYCOMPANY.COM
•
KDC (AD Server)
the server on which Kerberos/Active Directory is installed).
Example: mycompany.com:88
•
Domain Mapping
qualified domain name.
Example: mycompany.com
•
Service Keytab
keytab file. The service keytab file is a file you generate on your
Kerberos/Active Directory server. If you have not already
generated this file, do so now. For instructions, see
the Kerberos Service Keytab File
Browse button to upload the file.
5 Configure the LDAP settings as described in
the Library on page 89.
6 Click Apply to apply any changes.
7 If you enabled LDAP or Kerberos, or modified LDAP or Kerberos
settings, click the Test Settings button to test all the new or
changed LDAP settings. See
more information.
8 Save the library configuration (see
on page 106).
— The key distribution center (in other words,
— The domain portion of the library's fully
— Click the Browse button to select the service
on page 95. Then click the
Testing LDAP Settings
Saving the Library Configuration
Quantum Scalar i40 and Scalar i80 User's Guide
Generating
Configuring LDAP on
on page 93 for