Viewing Your License Keys; Viewing Installed Licenses; Obtaining A License Key - Quantum scalar i40 User Manual

Viewing Your License
Keys
Viewing Installed
Licenses

Obtaining a License Key

Quantum Scalar i40 and Scalar i80 User's Guide
If you replace the SCB: The SCB contains information about your
library configuration. If you replace your SCB, you must reinstall your
license key(s) onto the library. You may be able to reinstall them yourself
if you have saved the license keys or can retrieve them from the Web
sites listed above. In some cases, factory installed license keys will not be
listed on the Web site and you will need to contact Quantum Support
for a replacement. If you cannot retrieve your license keys or need
assistance, contact Quantum Support.
To see the licenses you have purchased and obtained, go to the
following Web site: http://www.quantum.com/licensekeys. The license
history for each feature is listed (feature licensed, authorization code,
and date license key was obtained).
To see which licenses are installed on your library, go to the following
screens:
Operator Panel
Select either of the following
• Reports > Licenses
• Setup > License Installation
Web Client
Select Setup > License.
To obtain your license key for a new feature or upgrade:
1 Contact your Quantum technical sales representative to submit your
order for the feature or upgrade.
2 Upon receipt of your order, Quantum will mail you a license key
certificate containing your authorization code.
Chapter 4: Configuring the Library
Adding or Upgrading Licensable Features
69