Unpacking The Library - Quantum scalar i40 User Manual

Quantum Product Name User's Guide

Unpacking the Library

Choose a location in which to install the library that is as free from dust
as possible. Dust can damage or degrade performance of library
components and media.
Refer to the following section of this manual for important information
that you need when installing and setting up your library:
• Environmental Specifications
Note: Unpack the library as close to the installation location as
possible.
1 Inspect the outer library packaging for damage. If there is any
damage evident on the library packaging, do not continue with the
installation and contact Quantum customer support.
2 Open the library packing box and remove the kit tray containing the
accessory kit and the rail kit (see
tape drives packaged separately. Remove them and set aside for
installation later.
on page 282
Figure 6). Libraries are sent with
Chapter 2
17