Viewing Library Information On The Operator Panel; Viewing Partition Information; Viewing Tape Drive Information - Quantum scalar i40 User Manual

Viewing Library Information on the Operator Panel

Viewing Partition
Information
Viewing Tape Drive
Information
Quantum Scalar i40 and Scalar i80 User's Guide
available and may be saved for further analysis once the progress
window is closed."
The operator panel provides several brief reports about the library.
The operator panel provides an overview of partition information. For
each partition, you can see the following information:
• Online/offline mode
• Control path tape drive location coordinates
• Number of tape drives
• Number of storage slots
• Number of I/E station slots containing a tape cartridge assigned to
the partition
Operator Panel
1 Select Reports > Partitions.
2 If the library contains more than one partition, use the Up and
Down buttons to select a partition and press Select.
The operator panel provides an overview of tape drive information. For
each installed tape drive, you can see the following information:
• Online/offline mode
• Partition to which the tape drive is assigned
• Whether the tape drive is the control path for the partition
• State (ready/active/mounted)
• WWNN (if Fibre Channel) or SAS address (if SAS)
Chapter 8: Getting Information About the Library
Viewing Library Information on the Operator Panel
231