Viewing The Current Partitions; Changing Access To Partitions; Taking A Partition Online Or Offline - Quantum scalar i40 User Manual

Viewing the Current
Partitions
Changing Access to
Partitions
Taking a Partition
Online or Offline
Quantum Scalar i40 and Scalar i80 User's Guide
You can view basic details about all of your partitions, including online/
offline status, control path tape drive, number of tape drives in the
partition, number of storage slots, and number of I/E station slots
available to the partition.
Operator Panel
1 Select Reports > Partitions (alternatively, select Setup >
Configure Partitions > View Current Partitions).
2 If more than one partition is configured on the library, select a
partition and press Select.
Web Client
You can view partition information in several places:
• Library home page (see
• Library configuration report (see
Report on page 220).
• Partition modification screen (select Setup > Configure Partitions,
select a partition, and click Modify).
An administrator can control which partitions a specified user can
access by modifying the user's account on the Web client. For more
information, see Working With Local User Accounts and Passwords
page 79.
Web Client
Select Setup > User Management > User Accounts.
There are two partition modes: online and offline.
• Online — SCSI hosts control the partition. In this mode, all host
application SCSI commands are processed.
Chapter 4: Configuring the Library
Web Client Home Page
Viewing the Library Configuration
Working With Partitions
on page 31)
on
57