Unpacking The Library - Quantum scalar i40 User Manual

Quantum Product Name User's Guide
5 With the help of a second person, lift the library chassis out of the
shipping carton and place it on a table approximately waist high.
WARNING: Two people are required to safely lift the library out of
its packaging or into a rack.
Caution: Lift the library chassis at the sides. Avoid putting the
weight of the library chassis on the front bezel.
6 Remove the anti-static wrapping from the library. Keep the anti-
static wrapping intact so that you can use it later if needed.
7 Save the packing box, packaging material, and anti-static wrapping
in case you need to move or ship the library in the future.
WARNING: If you need to move or ship the library in the future
and do not have the packing materials your library
was originally packaged with, contact your Quantum
representative to order a repackaging kit. Shipping
the library without these restrains can cause
significant damage to the library.
8 Remove the Y-tray restraint. The Y-tray restraint consists of four (4)
thumbscrews, a plastic sheet with a small metal clip, and
underneath the plastic sheet, an orange restraint tab—located on
the top cover of the library. See
a Unscrew and remove the four thumbscrews from the top cover
(see Figure 7). Save the thumbscrews in case you need to move
or ship the library in the future.
WARNING: If you need to move or ship the library in the
b Remove the plastic sheet with metal clip and discard. You will
not need to use them again.
Figure
future and do not have the four thumbscrews
and small metal clip, contact your Quantum
representative to order a repackaging kit.
Shipping the library without these restrains can
cause significant damage to the library.
Chapter 2: Unpacking the Library
7.
19