Chapter 9: Updating Firmware
Updating Library Firmware
238
Note: You can also view a listing of the latest version of library
firmware on the following Web site:
http://www.quantum.com/ServiceandSupport/
SoftwareandDocumentationDownloads/SI40/Index.aspx
and click the Firmware tab.
View your library's current firmware version by selecting
Reports > About Library from the operator panel, or
Reports > About > Scalar i40/i80 from the Web client.
2 Unload tape cartridges from all tape drives installed in the library.
3 Capture a library snapshot (see
Information
on page 253).
4 Save the library configuration (see
on page 106).
5 If the library has an Internet connection, use the Web client to
update the library to the latest firmware. If the library does not have
an Internet connection, use a Web browser to select a specific
firmware file with which to update the library.
Update using the Web Client
a From the Web client, return to Tools > Update Library
Firmware.
The Tools - Update Library Firmware screen displays.
b Click the check box next to Update library firmware with the
version from the Quantum Support Web site.
Note: If a newer version is already installed on your library,
you will receive a warning message.
c Click Read EULA to read and click Accept to accept the End
User License Agreement.
d Go to
Step
6.
Capturing Snapshots of Library
Saving the Library Configuration
Quantum Scalar i40 and Scalar i80 User's Guide
Need help?
Do you have a question about the scalar i40 and is the answer not in the manual?