Remote Access Via Web Client; Remote Service Login; Snmp V1/V2 - Quantum scalar i40 User Manual

Chapter 4: Configuring the Library
Configuring Security Settings
Remote Access Via Web
Client

Remote Service Login

SNMP V1/V2

104
Enables or disables remote access to the library via the Web client. This
setting is enabled by default (meaning remote access is allowed).
Operator Panel
1 Select Setup > Security Services > Web client.
2 Press Modify.
3 Use the Up and Down buttons to select Enabled or Disabled and
press Apply.
4 Make another selection or press Exit.
5 Save the library configuration (see
on page 106).
Enables or disables remote service user login (from the Web client or
over the Ethernet service port). The service user will still be able to log in
to the library from the operator panel. This setting is enabled by default
(meaning remote service login is allowed).
Operator Panel
1 Select Setup > Security Services > Service User
2 Press Modify.
3 Use the Up and Down buttons to select Enabled or Disabled and
press Apply.
4 Make another selection or press Exit.
5 Save the library configuration (see
on page 106).
This topic is discussed in
Saving the Library Configuration
Saving the Library Configuration
Enabling SNMP Versions
Quantum Scalar i40 and Scalar i80 User's Guide
on page 44.