Dynamo - Kubota SM-E4B Series Workshop Manual

SM-E4B SERIES, WSM

(8) Dynamo

1. Remove the nut and separate the plate (7).
2. Tap out the shaft (1) from the rotor (3).
3. Unscrew the screws and remove the stator (6).
(When reassembling)
• Take care the direction of the collar (4), the flat side should face to the pulley side.
Tightening torque Pulley nut
40 to 44 N·m
4.0 to 4.5 kgf·m
29 to 32 lbf·ft
1-S49
ENGINE
(1) Shaft
(2) Pulley
(3) Rotor
(4) Collar
(5) Bearing
(6) Stator
(7) Plate
(8) Bearing
9Y1210785ENS0059US0
KiSC issued 01, 2013 A