Sensor (paddle motor HP) removal
1
Remove the stapler left cover. See
2
Disconnect the cable (A) from the sensor. Remove the screw (B), and then remove the sensor bracket.
3
Release the latches securing the sensor to the bracket, and then remove the sensor.
Media stack flap (right) removal
1
Remove the stapler left cover. See
2
Remove the stapler right cover. See
3
Remove the stapler top cover. See
"Stapler left cover removal" on page
"Stapler left cover removal" on page
"Stapler right cover removal" on page
"Stapler top cover removal" on page
Repair information
643
630.
A
B
630.
624.
635.
4063