Maintenance - Lexmark CX825 Service Manual

Maintenance

Scheduled maintenance
The control panel displays an 80.xx error when the printer reaches a preset number of page counts. It is
necessary to install the appropriate maintenance kit to maintain the print quality and reliability of the printer.
Reset the maintenance counter after replacing the maintenance kit.
Maintenance kits
Part number and kit
41X0931—200K ADF maintenance kit
41X0927—300K Combo fuser and transfer module
maintenance kit, 100 V
41X0928—300K Combo fuser and transfer module
maintenance kit, 115 V
41X0929—300K Combo fuser and transfer module
maintenance kit, 220 V
41X0930—300K Roller kit
Resetting the maintenance counter
Separator pad and pick roller counter reset
Reset the counter after installing the new separator pad and pick roller.
1
From the control panel, navigate to:
Settings > Maintenance > Configuration menu > Supply usage and counters
2
On the Reset Separator Roll and Pick Assembly Counter row, touch Start.
Contents
•
41X0358—ADF pick roller
•
41X0359—ADF feed belt
•
ADF separator roller
•
41X0248—Fuser (100 V)
•
41X0245—Transfer belt
•
41X0154—Transfer roller
•
41X0999—Pick roller and separator pad, 3 units
•
41X0246—Fuser (115 V)
•
41X0245—Transfer belt
•
41X0154—Transfer roller
•
41X0999—Pick roller and separator pad, 3 units
•
41X0247—Fuser (220 V)
•
41X0245—Transfer belt
•
41X0154—Transfer roller
•
41X0999—Pick roller and separator pad, 3 units
•
41X0154—Transfer roller
•
41X0999—Pick roller and separator pad, 3 units
Maintenance
1261
7564