Spreadsheet View: Keep-Ins/Keep-Outs Tab - National Instruments Graphical User Interface Ultiboard User Manual

Chapter 1 User Interface

Spreadsheet View: Keep-ins/Keep-outs Tab

NI Ultiboard User Manual
Use the Keep-ins/Keep-outs tab to work with information for Keep-in or
Keep-out areas.
Column
Name Name of the Keep-in or Keep-out. Can be entered
here, or in the Keep-in/Keep-out Properties dialog
box. Refer to the
Areas
Copper, for more information.
Type Indicates whether the area is a Keep-in or a Keep-out.
Can be set here or in the Keep-in/Keep-out
Properties dialog box. Refer to the
Keep-in/Keep-out Areas
Working with Traces and
information.
Locked Yes means that the Keep-in/out area cannot be moved
or edited. No means that the Keep-in/out area can be
moved.
Layers To Double-click to display the Layers To Apply dialog
Apply box, where you select the layers to which you wish to
apply the Keep-in/out. You can also set this in the
Keep-in/Keep-out Properties dialog box. Refer to
the
Chapter 5,
information.
Net Group Double-click to display the Select Groups dialog
box, where you select the net group to which you wish
to apply the Keep-in/out. You can also set this in the
Keep-in/Keep-out Properties dialog box. Refer to
the
Chapter 5,
information.
Description
Working with Keep-in/Keep-out
section of Chapter 5,
Working with Keep-in/Keep-out Areas
Working with Traces and
Working with Keep-in/Keep-out Areas
Working with Traces and
1-44
Working with Traces and
Working with
section of Chapter 5,
Copper, for more
section of
Copper, for more
section of
Copper, for more
ni.com