Table of Contents
Advertisement
O
Output Window
P
Pad Stack
Part Grid
Prepreg
R
Ratsnest
RefDes
Reference Point
S
SMD Pad
Status Bar
© National Instruments Corporation
Gives you useful information on the status of your design. By default, is
turned off.
The connections between layers of the board.
Determines the increments by which elements (parts and shapes) can be
placed on the board.
Prepreg is fiber glass that is pre-impregnated with resin to make it
semi-rigid. Prepreg sheets can then be placed between the copper foil and
heated under pressure to activate and set the resin.
Visual display showing linear connections between pins, using the shortest
possible line. A guide for pin connections, not a realistic representation of
the board.
Reference designator, the unique name given to a net.
The point from which coordinates are calculated, in normal mode. Set
using Design»Set Reference Point.
A pad without a drill hole (drill diameter property in the pad code set to 0).
Displays useful and important information at the bottom of your screen.
G-3
Glossary
NI Ultiboard User Manual
Advertisement
Table of Contents
