File»Print Setup; File»Print Preview; File»Print; File»Recent Designs - National Instruments Graphical User Interface Ultiboard User Manual

File»Print Setup
File»Print Preview
File»Print
File»Recent Designs
File»Exit

Edit Menu

Edit»Undo
Edit»Redo
© National Instruments Corporation
Sets up the printing paramaters required to print the Ultiboard design file.
Refer to the Printing your Design
Manufacturing/Assembly, for more information. This is found in the
3D view only.
Lets you preview the design file before printing. Refer to the
Design section of Chapter 8,
more information. This is found in the 3D view only.
Prints the Ultiboard design file. Refer to the
of Chapter 8, Preparing for
information.
Displays a list of the most-recently-opened projects. Click on the desired
item in the list to open it.
Exits Ultiboard. You are prompted to save any unsaved design files and/or
projects.
The subjects in this section describe the commands found in the Edit menu.
Undoes your most recent action (for example, undoes the last part move).
The command name changes to reflect what will be undone.
Redoes your most recent "undo" action. The command name changes to
reflect what will be redone.
Appendix A
section of Chapter 8,
Preparing for Manufacturing/Assembly, for
Manufacturing/Assembly, for more
A-3
Menus and Commands
Preparing for
Printing your
Printing your Design
NI Ultiboard User Manual
section