Table of Contents
Advertisement
Chapter 1
User Interface
Spreadsheet View: THT Pads Tab
NI Ultiboard User Manual
Column
Trace
The clearance of the trace to parts. You can use net
Clearance
settings, or as set in the SMT Pin Properties dialog
box. Refer to the
Properties
for more information.
Neck Length
The default length of the neck where the trace attaches
to the pin, as set in the SMT Pin Properties dialog
box. You can also enter the value here. Refer to the
Viewing and Editing SMT Pin Properties
Chapter 4,
Neck Max
The maximum permitted length of the neck where the
trace attaches to the pin, as set in the SMT Pin
Properties dialog box. You can also enter the value
here. Refer to the
Properties
for more information.
Neck Min
The minimum permitted length of the neck where the
trace attaches to the pin, as set in the SMT Pin
Properties dialog box. You can also enter the value
here. Refer to the
Properties
for more information.
Min Width
The minimum permitted trace width.
Use the THT Pads tab to work with pad information for through-hole
technology devices.
Column
Pad Name
The unique identifier for the pad, by RefDes and Pin
Number. For example, U1, P1 is pin number one of
the part with RefDes U1.
Top Pad
The shape of the top layer pad as set in the Through
Shape
Hole Pin Properties dialog box. Refer to the
and Editing Through Hole Pin Properties
Chapter 4,
Description
Viewing and Editing SMT Pin
section of Chapter 4,
Working with
Viewing and Editing SMT Pin
section of Chapter 4,
Viewing and Editing SMT Pin
of Chapter 4,
Description
Working with
1-40
Working with
section of
Parts, for more information.
Working with
Working with
Parts, section
Viewing
section of
Parts, for more information.
Parts,
Parts,
ni.com
Advertisement
Table of Contents
