National Instruments Graphical User Interface Ultiboard User Manual page 27

© National Instruments Corporation
Button
Place Text button. Places text on the design. Useful for
annotation purposes. Refer to the
Text section of Chapter 8,
Manufacturing/Assembly, for more information.
Place a Standard Dimension button. Places a dimension
between any two selected points. Refer to the
with Dimensions
Parts, for more information.
Place a Horizontal Dimension button. Places a
horizontally-oriented dimension between two selected
points. Refer to the
Chapter 4,
Place a Vertical Dimension button. Places a
vertically-oriented dimension between two selected
points. Refer to the
Chapter 4,
Place a Net Bridge button. Places a net bridge
connection. Refer to the
Working with Traces and
Place a Hole button. Places a hole on your PCB.
Place a Via button. Places a via on the design. Refer to
the Working with Vias
Traces and
Place Pins button. Places pins on the design when editing
or creating a part in In-place Edit mode or Footprint Edit
mode. Refer to the
and Using the Database Manager to Create a Part
sections of Chapter 4,
information.
1-11
Description
Preparing for
section of Chapter 4,
Working with Dimensions
Working with Parts, for more information.
Working with Dimensions
Working with Parts, for more information.
Net Bridges
Copper, for more information.
section of Chapter 5,
Copper, for information.
Editing a Placed Part (In-Place Edit)
Working with
Chapter 1 User Interface
Placing and Editing
Working
Working with
section of
section of
section of Chapter 5,
Working with
Parts, for more
NI Ultiboard User Manual